
|
Home > Marine > Electronic Bilge Pump Switch, Positive Switching
Electronic Bilge Pump Switch, Positive Switching
|
193 in stock.
Item Number: RP777
Mfr: Bocatech Inc
Mfr P/N: BTBIMA
Quantity Discounts
Quantity | Amount |
10 to 24 | $7.55 |
25 to 49 | $7.31 |
50 to 99 | $6.67 |
100 to 499 | $6.04 |
500 to 999 | $5.80 |
|
|
Electronic Bilge Pump Switch, Positive Switching
The Bilge-Mate is a solid state, automatic, electronic bilge pump switch designed to relpace mechanical float switches. Simply connect the wires of the 2.5 foot cable provided and place the Bilge-Mate into the lowest portion of the bilge to be pumped. It will operate in any position, automatically monitoring the level of water in your bilge, switching the pump on and turning it off when empty. No mechanical parts to fail, foul or jam. Built-in delay prevents false operation. It will work in the cleanest or nastiest of bilges. Impervious to oil, gas, diesel or other contaminates found in bilges. Rated 12-36 Volt DC, 15 Amps, wait state draws only 2 mA When the bilge water level touches the stainless steel sensors, the pump is activated after a 20-30 second delay. The pump runs while the sensors are wet and continues for 15-20 seconds after the sensors are dried. Dimensions: 2.75" (L) x 2.75" (W) x 2.38" (H) Power Cord 2.5 Foot Length Positive Switching Circuit, Wiring Diagram Included
Features: • Maintenance free • No moving parts • Easy installation • No mounting required • Eliminates pump cycling due to boat movement • Maintenance free • Potted solid state electronics / hermetically sealed • Meets/exceeds ABYC, NMMA, USCG standards
Bocatech Inc BTBIMA-pos
California Residents: WARNING Proposition 65
|
|
|
|